Battery
Based on Germany HAGEN Corporation Technology for foundation craft production, uses import PVC-SiO2 partition board, the capsule and the gas phase SiO2(ge1) produce colloid accumulator cells. The product conforms to the DIN standard. The life is about conventional battery’s 4 times, generally guaranteed 3-5years.(Advanced batteries provide 5-8 years maintaince free service)
THE CHARACTERISTIC OF CHARGE CONTROLLER
>Recise control of digital and intelligent (Advanced digital design)
>Keep the battery in the full state(maintains)
>Prevent the battery overcharging
>Prevent the battery over discharging
>Prevent the battery reverse charge to PV cells
>When the battery voltage reach to the setting,disconnect the charge circuit,automatically detect wind turbine output voltage at the same time,when the wind generator output voltage is too high,the automatic braking of wind turbines.
>When the current is too large,the controller is automatic protection and control of wind>turbine braking in high wind
>The wind turbine manual brake protection.(switch)
>If load current over the rated current,the controller automatically protected and locked “Load Over Current”.
>Counting charging current hours and discharging current hours of the battery,counting wind turbine and PV cell power generation.
>According to the battery voltage automatically set the stop charging voltage,load off voltage,load recovery voltage,the braking current and braking time.
>Users can set-up the Charge-on or off voltage,the load-off voltage,the Load-on voltage,braking current and braking time ect,according to their requirements.
>To prevent battery from over charging,Controller will autimatically control the highest overcharge voltage of the battery,which is no higher than 15V(as per 12V battery) or 30V(as per 24V battery). |
